18
3) In 1~4 EDID:
Select the EDID to assign to the specified input.
Note: Only available in the “Appoint” EDID Mode.
4) User 1~4 EDID:
To update any of the unit’s 4 User EDIDs via USB,
select “Yes” next to the appropriate User EDID and then insert a USB
stick containing the new EDID into the Service port. The upload will occur
immediately.
Note: The USB stick must contain, in the root directory, a compatible and
properly named (EDID_User_*.BIN) EDID file.
HDCP MODE
2ND LEVEL
3RD LEVEL
In 1~4
HDCP Support Off
REFER TO SOURCE
Refer to Display
OUT A
[Current HDCP
status display]
OUT B
Win 1
Win 2
Win 3
Win 4
1) In 1~4:
Select the HDCP behavior for each input.
HDCP Support Off:
Completely disables support for HDCP on that
input.
Refer to Source:
Makes the input port support the same HDCP
version as required by the connected source.
Refer to Display:
Makes the input support the HDCP version of the
currently connected displays.
2) HDCP Status:
Displays the current HDCP status of all sources and
outputs.
