CYP CSC-6012RX, Operation Manual

Page: 11 / 40

6
speed is 100Mbit/s.
2 IR IN: Connect to the provided IR Extender to extend the IR control
range of remotely located devices. Ensure that the remote being
used is within direct line-of-sight of the IR Extender.
3
IR OUT: Connect to the provided IR Blaster to transmit IR signals to
devices within direct line-of-sight of the IR Blaster.
4
RS-232: Connect to a PC, laptop or other serial control device
with a 3-pin adapter cable for the extension of RS-232 signals to
the Receiver. For receiving commands from the Receiver side,
depending on your equipment’s pinout, the Tx and Rx pins might
need to be reversed.
5
CAT5e/6/7 OUT: Connect to a compatible Receiver unit with a
single Cat.5e/6/7 cable for transmission of all data signals. The
output resolution can be different from the resolution selected for
the HDMI output. A test pattern can also be displayed. 48V PoH will
be provided to compatible Receivers only.
6
HDMI OUT: Connect to HDMI TVs, monitors or amplifiers for digital
video and audio output. The output resolution can be different
from the resolution selected for the HDBaseT output. A test pattern
can also be displayed.
7
AUDIO OUT: Connect to powered speakers, an audio amplifier,
mixer, or DSP for balanced stereo analog output extracted from
an HDMI or OAR source with LPCM 2.0 audio. (Follows balanced
audio specifications.)
8
HDMI IN: Connect to HDMI source equipment such as a media
player, game console or set-top box.
9
DC 24V: Plug the 24V DC power adapter into the unit and connect
it to an AC wall outlet for power.