CYP CPLUS-V8H8HPA, Operation Manual

Page: 29 / 56

24
6.7.5 System Settings Tab
This tab provides system information, power control, Ethernet
configuration options, system configuration backup/restore, and
firmware update functions.
1) Power: Press this switch to toggle the unit’s power between ON
and OFF (standby mode).
Note: While in standby mode the unit’s WebGUI, Telnet and RS-232
controls are still active.
2) Network: The unit’s IP mode may be switched between Static IP or
DHCP. In Static IP mode the IP, netmask and gateway addresses
may be manually set. When in DHCP mode, the unit will attempt
to connect to a local DHCP server and obtain IP, netmask and
gateway addresses automatically. Press “Save” after making any
changes to the IP configuration or mode.
Note: The unit’s default IP address is 192.168.1.50. If the IP address
is changed then the IP address required for WebGUI/Telnet access
will also change accordingly.
3) Download Current Configuration: The current system configuration,
including routing and presets, may be saved as an XML file to
a PC. Click the “Download” button to save the current system
configuration to your local PC.
4) Restore Configuration: Previously saved system configurations may
be restored from a saved XML file. Click the “Choose File” button