CYP CPLUS-V8H8HPA, Operation Manual

Page: 10 / 56

5
6.2 Rear Panel
A B C D E F G H
HDMI OUT
CONTROL RS232 SERVICE DC 24V
1 2 3 4 5 6 7 8
HDMI IN
IR IN
AUDIO OUT
A B C D E F G H
1 2
3 6 5 4 7 8
1
HDMI IN 1~8 Ports: Connect to HDMI source equipment such as
media players, game consoles or set-top boxes.
2
HDMI OUT A~H Ports: Connect to HDMI TVs, monitors, or amplifiers
for digital video and audio output.
3 AUDIO OUT A~D Ports: Connect to powered speakers or an
amplifier for analog stereo audio output. The audio from each
stereo analog output will be the same as the HDMI output it is
paired with.
Note: Supports LPCM 2.0 audio sources only.
4
IR IN Port: Connect to the provided IR Extender to extend the IR
control range of the unit. Ensure that the remote being used is
within direct line-of-sight of the IR Extender.
5
CONTROL Port: Connect directly, or through a network switch, to
your PC/laptop to control the unit via Telnet/WebGUI.
6 RS232 Port: Connect directly to a PC, laptop or other serial control
device to send RS-232 commands to control the unit.
7
SERVICE Port: This slot is reserved for firmware update use only.
8 DC 24V Port: Plug the 24V DC power adapter into the unit and
connect it to an AC wall outlet for power.