CYP CPLUS-V8H8HPA, Operation Manual

Page: 27 / 56

22
This matrix provides the following 6 default EDIDs:
Unit’s Default EDIDs
FHD/2CH 1920×1080p@60Hz (4.95Gbps) & 8-bit color, LPCM
2.0
FHD/MCH 1920×1080p@60Hz (4.95Gbps) & 8-bit color, LPCM
7.1 & Bitstream
UHD/2CH 3840×2160p@30Hz (10.2Gbps) & Deep Color
(8/10/12-bit), LPCM 2.0
UHD/MCH 3840×2160p@30Hz (10.2Gbps) & Deep Color
(8/10/12-bit), LPCM 7.1 & Bitstream
UHD+/2CH 3840×2160p@60Hz (18Gbps) & Deep Color
(8/10/12-bit), LPCM 2.0
UHD+/MCH 3840×2160p@60Hz (18Gbps) & Deep Color
(8/10/12-bit), LPCM 7.1 & Bitstream
Note: In some rare cases it is possible for custom or external EDIDs to
cause compatibility issues with certain sources. If this happens, it is
recommended to switch to one of the 6 default EDIDs for maximum
compatibility.
6.7.3 Device Settings Tab
This page provides control over the matrix’s hardware related settings
and options including IR settings and fan control.
1) IR Channel: Use the dropdown to select the IR channel used
to control the matrix using the included remote. If this setting is
changed, the dipswitches inside the remote control’s battery
compartment must also be changed to match.
Note: By default both the remote and the unit are set to channel 15.