CYP CH-527RXVBD, Operation Manual

Page: 9 / 20

4
6.2 Rear Panel
HDMI OUT
CAT5e/6/7
IN
IR
EXTENDER
IR
BLASTER DC 24V
+
-
1 2 3 4 5
1
DC 24V Terminal Block: Plug the 24V DC power adapter into this
terminal block and connect it to an AC wall outlet for power.
(Optional)
Note: This connection is not required if the unit is receiving power
via 24V PoC from the Transmitter.
2
IR BLASTER Port: Connect to an IR Blaster to transmit IR signals from
the other end of the HDBaseT connection to devices within direct
line-of-sight of the IR Blaster.
3 IR EXTENDER Port: Connect to the provided IR Extender to receive
IR control signals and extend them to devices connected to the
other end of the HDBaseT connection. Ensure that the remote
being used is within direct line-of-sight of the IR Extender.
4
CAT5e/6/7 IN Port: Connect to a compatible HDBaseT Transmitter
with a single Cat.5e/6/7 cable for transmission of all data signals.
24V PoC can also be supplied to, or received from, a connected
compatible Transmitter.
Note: The 24V PoC function is designed to power, or receive power
from, compatible Transmitter units only. Non-PoC Transmitters will
need their own power supply. Other brands of Transmitter may not
be compatible.
5
HDMI OUT Port: Connect to an HDMI TV, monitor, or amplifier for
digital video and audio output.