3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
RS-232
POWER
ISP
LAN
STD
UPDATE
SYNC
1
2
3
4
5
1
ISP Pinhole:
This button is reserved for factory use only.
2
STD/UPDATE Switch:
This switch is reserved for factory use only.
Note: This should be left on the default setting of “STD” for normal
operation.
3
RS-232 Port:
Connect to a PC, laptop, or serial controllable device
for the extension of RS-232 signals between both ends of the
HDBaseT connection.
4
LAN Port:
Connect to an Ethernet supporting device or to your
local network, as appropriate, to extend the network to both ends
of the HDBaseT connection.
5
POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
SYNC LED:
This LED will illuminate when a live input source is
detected.
Summary of Contents for CH-527RXVBD
Page 2: ......
Page 18: ......
Page 19: ......
Page 20: ...CYPRESS TECHNOLOGY CO LTD www cypress com tw ...