4
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER
LINK
1
OUT1
2
OUT2
LOCAL
RS-232
HDMI
OUT 1
OUT 2
CAT5e/6/7
USB
SELECT
VIDEO SELECT
SERVICE
1
2 3
4
5
6
1
POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
2
LINK LED:
This LED will illuminate solidly when a live connection with
a compatible Transmitter is active.
3
LOCAL RS-232 Port:
Connect directly to a PC, laptop, or other
serial control device with a 3.5mm adapter cable to send RS-232
commands to control the unit.
4
OUT 1 Button & LEDs:
Press this button to toggle between the
available inputs for HDMI output 1. The OUT 1 LED will illuminate to
indicate which source is currently selected.
OUT 2 Button & LEDs:
Press this button to toggle between the
available inputs for HDMI output 2. The OUT 2 LED will illuminate to
indicate which source is currently selected.
5
USB Device Ports (Type A):
Connect directly to standard USB
devices such as a mouse, keyboard or flash drive to extend their
USB functionality to the currently active USB Host Port.
6
USB SELECT Button & LED:
Press this button to toggle between using
the USB Host Port on the Receiver or the USB Host Ports on the
connected Transmitter. The LED will illuminate when the USB Host
Port on the Receiver is active. If the LED is off, then one of the USB
Host Ports on the connected Transmitter is active.
Note: Changing the USB host will force the HDBaseT connection to
briefly disconnect while it reconfigures. The connected host (PC,
Laptop, etc.) may also take a moment to detect all available
devices.