22
COMMAND
Description and Parameters
get in N1 interlace
Show if the source connected to input N1 is interlaced or not.
N1
= 1 ~ 2
[Input port]
Possible response values:
0 [Progressive]
1 [Interlaced]
get in N1 sync status
Show the detected sync state for input N1.
N1
= 1 ~ 2
[Input port]
Possible response values:
0
[No sync]
1
[Sync active]
get in N1 timing
Show the resolution and timing index value for input N1’s signal.
N1
= 1 ~ 2
[Input port]
get in N1 deep color
Show the detected color bit depth for input N1’s signal.
N1
= 1 ~ 2
[Input port]
get in type list
List the signal format of all inputs.
get out type list
List the signal format of all outputs.
set out route N1N2,N1N2
Set unique input routing for both outputs simultaneously.
N1
= A ~ B
[
Output port
]
N2
= 1 ~ 2
[Input port]
