23
COMMAND
Description and Parameters
set all out route N1
Set input routing for all outputs.
N1
= 1 ~ 2
[Input port]
get all out route
List the current input routing for all outputs.
set out N1 cec data N2
Send a CEC command, as hex data, to the display connected
to the specified output.
N1
= A ~ B
[
Output port
]
N2
= {CEC data}
[
Comma delimited hex pairs
]
get out N1 cec capability
Show if the display connected to the specified output supports
CEC.
N1
= A ~ B
[
Output port
]
set keylock N1
Enable or disable the front panel key lock.
Available values for
N1
:
ON
[
Locked]
OFF
[
Unlocked]
get keylock
Show the current front panel key lock state.
set current route to preset N1
Save all current routing assignments to the specified preset.
N1
= 1 ~ 2
[Preset number]
set route preset N1
Activate the routing assignments saved in the specified preset.
N1
= 1 ~ 2
[Preset number]