24
COMMAND
Description and Parameters
GET AUTOMATION EVENT N1 CEC
Show the current state of the specified Automation Event's CEC re
-
sponse.
Available values for
N1
:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
SET AUTOMATION EVENT N1 CEC DELAY N2 SEC
Set the delay time that the specified Automation Event must continue to
be true before sending the defined CEC command.
Available values for
N1
:
1
[Power
on]
2
[Out A source active]
3
[Out A source lost]
N2
= 1~300
[Delay in seconds]
GET AUTOMATION EVENT N1 CEC DELAY
Show the delay time for the specified Automation Event's CEC re
-
sponse.
Available values forr
N1
:
1
[Power on]
2
[Out A source active]
3
[Out A source lost]
SET AUTOMATION EVENT N1 CEC WAIT N2 SEC
Set the length of time to wait after an Automation Event's CEC re-
sponse has been activated before ANY other Automation Event can be
detected.
Available values for
N1
:
1
[Power
on]
2
[Out A source active]
3
[Out A source lost]
N2
= 1~300
[Wait time in seconds]
Note: If both an RS-232 and CEC event is activated by the same Auto-
mation Event, the longer of the 2 wait times will be used.
