CYP CH-1539TXPLPD, Operation Manual

Page: 29 / 44

24
COMMAND DESCRIPTION AND PARAMETERS
set automation event N1
cec A N2 Enable or disable the specified Automation
Event's CEC response.
Available values for
N1
:
1 [Power on]
2 [Out A source
active]
3 [Out A source lost]
Available values for
N2
:
ON [Event enabled]
OFF [Event disabled]
get automation event N1
cec A Show the current state of the specified
Automation Event's CEC response.
Available values for
N1
:
1 [Power on]
2 [Out A source active]
3 [Out A source lost]
set automation event N1
cec A delay N2 Set the delay time that the specified
Automation Event must continue to be true
before sending the defined CEC command.
Available values for
N1
:
1 [Power on]
2 [Out A source active]
3 [Out A source lost]
N2
= 0 ~ 240 [Delay time in seconds]