CYP CH-1539TXPLPD, Operation Manual

Page: 10 / 44

5
4
DP IN Port:
Connect to DisplayPort source equipment such as a PC or
laptop.
5
CAT.5e/6/7 OUT Port:
Connect to a compatible HDBaseT Receiver with
a single Cat.5e/6/7 cable for transmission of all data signals. PoH will
also be supplied to a connected compatible PD Receiver.
6
IR EXTENDER Port: Connect to an IR Extender to receive IR control
signals and extend them to devices connected to the other end of the
HDBaseT connection. Ensure that the remote being used is within direct
line-of-sight of the IR Extender.
7
IR BLASTER Port:
Connect to the provided IR Blaster to transmit IR
signals from the other end of the HDBaseT connection to devices within
direct line-of-sight of the IR Blaster.
8
RS-232 CONSOLE Port:
Connect directly to a PC, laptop, or other serial
control device with a 3-pin adapter cable to send RS-232 commands to
control the unit.
RS-232 BYPASS Port:
Connect to a PC, laptop, or other serial control
device with a 3-pin adapter cable for the extension of RS-232 signals to
the Receiver.
9
DC 24V Port:
Plug the 24V DC power adapter into this port and connect
it to an AC wall outlet for power.