CYP CH-1539TXPLPD, Operation Manual

Page: 27 / 44

22
COMMAND DESCRIPTION AND PARAMETERS
get edid N1 name Show the current name of the specified EDID.
Available values for
N1
:
7 [User EDID 1]
8 [User EDID 2]
9 [User EDID 3]
10 [User EDID 4]
set user N1 edid data N2
Upload a new EDID (in HEX format) for use
as the specified User EDID.
N1
= 1 ~ 4 [User EDID]
N2
= {EDID data} [Comma delimited
hex pairs]
get user N1 edid data Show the current contents of the specified
User EDID as HEX data.
N1
= 1 ~ 4 [User EDID]
set out auto mode N1
Set the auto switching behavior of the unit.
Available values for
N1
:
0 [Disabled]
1 [Auto switch]
get out auto mode
Show the current auto switching mode of the
unit.
get ipconfig
Show the unit's current IP configuration
information.
set ip mode N1
Set the IP address assignment mode.
Available values for
N1
:
0 [Static IP mode]
1 [DHCP mode]
get ip mode
Show the current IP address assignment
mode.