3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1 2 3 4 Learned
Select
HDMI IN
5 6 7 8 Default
1
2
3
4
1
1~8 LEDs:
When in 'Learned' or 'Default' mode,
each of these LEDs
indicates a different EDID setting (1 to 8). Repeatedly press the
'Select' button to switch between settings, the LED will illuminate to
indicate the current selected settings.
2
Learned LED:
Select the 'Learned' mode to save up to 8 unique
sets of HDMI EDID settings. Please refer to Section 6.3 for the EDID
learning procedure.
Default LED:
Select the 'Default' mode to use the built-in default
EDID settings, press 'Select' button to choose from 1~8. Please refer
to Section 6.4 for the default EDID settings.
3
Select Button:
Press for 3 seconds to switch between the 'Learned'
and 'Default' modes, the LED will illuminate to indicate the selected
mode.
Then repeatedly press the 'Select' button to cycle through EDID
settings (1 to 8).
4
HDMI IN:
Connect to an HDMI source such as a DVD/Blu-ray or set-
top box. The unit can also be powered by an source device that
provides power over the HDMI connection.
