32
COMMAND
Description and Parameters
device N1 N2
Enable or Disable the specified Telnet Device.
Available values for
N1
:
ENABLE
[Enable the Telnet Device]
DISABLE
[Disable the Telnet Device]
N2
= 1~16
[Device Slot number]
SET_COND N1 N2
Assign a value to the specified Condition port(s).
set_cond N1 N2
Assign a value to the specified Condition port(s).
N1
= 1~64
[Condition port number]
N2
= 0~255
[Condition value]
Note: Multiple values may be entered for N1 or N2 by separating the
values with commas. Both sets must have the same number of values.
set_cond N1 ++ N2 N3
Set a temporary min/max value range for the specified Condition port(s)
and increase the stored value by 1.
N1
= 1~64
[Condition port number]
N2
= 0~255
[Adjustment minimum value]
N3
= 0~255
[Adjustment maximum value]
Note: Multiple values may be entered for N1, N2 and N3 by separating
the values with commas. All 3 sets must have the same number of
values.
