5
6.3 Physical Installation
6.3.1 UK 2-gang
1
4
3
3
2
1
Remove the decorative faceplate from the front of the unit by pulling on it
gently.
2
Place the unit into a UK 2-gang electrical wall box (not included) and
ensure that all necessary cabling (Ethernet, power, relay) is properly fed
through the back access holes in the wall box and connected to the back
of the unit.
3
Secure the unit in place with appropriate mounting screws. Typically
these are supplied with the electrical wall box.
4
Reattach the decorative faceplate to the front of the unit.
