27
6.4.12 Time Settings Tab
This tab provides controls to set the system’s time, date, and time zone. After
setting the system time, the unit will maintain the correct time, even when
powered off, due to a battery backed up clock. If your country uses DST
(Daylight Saving Time) you can enable or disable it here and configure the
start and end times/dates so that your scheduled events will always occur at
the correct times throughout the year.
Note: This unit has 48 hours of backup power for the internal clock to protect
against power loss and blackouts. After the backup power is exhausted the
system time will reset back to 2015/01/01 00:00:00.
1) System Time:
The unit’s time and date can be manually configured here.
Click in the empty box to open the time and date configuration screen
and select the preferred values. After entering a new time and date, click
the “Save” button to store it in the unit and start the clock running.
2) Daylight Saving Time:
Enable or disable the use of DST adjustments
for the unit’s time.
Note: Enabling Daylight Saving Time while outside the configured DST
range will result in no change to the current time.
■ Start:
Set the month, week, day and time for the start of DST in the
current time zone.
■ End:
Set the month, week, day and time for the end of DST in the
current time zone.
