27
6.6 Telnet Control
Before attempting to use Telnet control, please ensure that both the
unit and the PC are connected to the same active networks.
To Access the Command Line Interface (CLI)
Windows 7
Click
Start
, type “cmd” in the search field, and
press
Enter
.
Windows XP
Click
Start
>
Run
, type “cmd”, and press
Enter
.
Mac OS X
Click
Go
>
Applications
>
Utilities
>
Terminal
.
Once in the Command Line Interface (CLI) type
“telnet”
followed by
the IP address of the unit (and the port number if it is non-standard)
and then hit
“Enter”.
This will connect us to the unit we wish to control.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Adminstrator\telnet 192.168.1.50 23
Note 1: If the IP address is changed then the IP address required for
Telnet access will also change accordingly.
Note 2: The default IP address is 192.168.1.50.
