background image

7

6.3 Remote Control

1

 POWER BUTTON: 

Press to power the unit 

on or place it into stand-by mode.

2

 COUNTDOWN Button:

 Press to enable/

disable the Countdown Timer display on 

the HDMI and streaming output.

3

 PLAY/STOP Buttons: 

Press to start/stop 

streaming to the configured target 

server.

4

 TEXT SCREEN Button:

 Press to enable/

disable the “Text Screen” feature.

5

 HDMI/VGA Buttons:

 Press to select HDMI 

or VGA as the input source.

6

 PICTURE QUALITY (BEST/HIGH/NORMAL) 

Buttons:

 Press these buttons change the 

streaming bitrate and resolution of the 

streaming output. Available options are:

 Best

 (1080p@30fps, 3000Kbps)

 High

 (720p@30fps, 2000Kbps)

 Normal

 (VGA@15fps, 1500Kbps)

 

Note: Changing the bitrate will force the video stream to restart.

7

  -(MINUS)/OK/+(PLUS)  Buttons:

 Press the OK button to start or stop 

the Countdown Timer. Press the plus and minus buttons to increase 

or decrease the remaining time in 30 second steps.

8

  VOL-/VOL+  Buttons:

 Press to increase or decrease the mixer output 

volume.

9

 

 

MIXER Button: 

Press to enable/disable the Audio Mixer function.

10

  SWITCH  Button: 

Press to toggle the audio source for the HDMI input 

between HDMI and analog stereo when the mixer is not enabled.

11

 

 

MUTE Button:

 Press to mute/unmute all audio output.

12

 

 

RECORD START Button:

 Press to start recording video to the currently 

designated storage location.

13

 

 

RECORD STOP Button:

 Press to stop recording video.

PLAY

STOP

SCREEN

NORMAL

MIXER

SWITCH

MUTE

CR-187

POWER

OK

HDMI

VGA

VOL –

AUDIO

HIGH

PICTURE QUALITY

BEST

VOL

+

TEXT

RECORD

STOP

START

COUNT

DOWN

1
3
5

6

7

8

9

10
12

2
4

11
13

Summary of Contents for CDPS-P311R

























































Reviews: