11
6.5.1 Live Tab
This tab provides viewing access to the first local video stream channel
(of 4 channels total) generated by the unit. The video source can be
selected here and the stream resolution, framerate and bitrate is also
displayed. At the bottom of the page, a connection address for local
video stream channel 1 is displayed in the format: “rtsp://xxx.xxx.xxx.
xxx/live/ch1/h264_aac” (xxx.xxx.xxx.xxx = the unit’s current IP address).
When 3rd party video player software with RTSP streaming support is
used to view streams from this unit, this is the URL that should be used
to connect. To view streaming channels 2~4, change “ch1” in the
address to “ch2”, “ch3”, or “ch4”, as appropriate.
Note: The Channel 1 configuration is set on the “Record Setting” tab.
Channels 2~4 contain the same video content presented at different
streaming resolutions. Channel 2 matches the current settings from
the “Streaming” tab, Channel 3 is 640x480@30fps, and Channel 4 is
320x240@30fps.
1) Source Select:
Select the video input (HDMI or VGA) to stream.
Note: Changing the input here will change it globally across the
unit.
2) Video Codec:
Indicates the video codec used for the video
stream.
Note: Currently, only H.264 is supported.
3) Maximum Resolution:
Displays the current maximum resolution for
streaming channel 1.
