11
6.4 Remote Control
1
POWER:
Press this button to switch
the system ON/OFF.
2
OUT A/B:
Press these buttons once a time
along with an IN buttons to select an input
source for an output display.
3
MODE:
Press to switch between Preview or
Matrix mode.
¾
Preview mode: From MENU option
select View All (1 Main video sources
and 5 Sub video sources) or PIP mode
(1 Main video sources and 1 Sub
video sources).
9
View All: Press IN 1~6 or MUTE to
select the Main channel.
From OLED menu select “Preview Position” for Sub
screens position.
9
PIP: Press OUT A (Main) or OUT B, then press IN1~6 or
MUTE to select Main or Sub video source. Press “ALL” or
Remote Control “ SWAP” to change Main/Sub video
source.
¾
Matrix mode: Press OUT A or OUT B or OUT A & B and then
press IN 1~6 or MUTE to select the input sources. After the
selection, press “TAKE” to confirm the selection or
press “CANCEL” to cancel the selection.
4
PV DISP:
Press to set ON/OFF the Preview Display.
5
SWAP:
In PIP mode, press to swap Main/Sub video source.
6
MENU:
Press to enter into the menu.
7
ENTER:
Press to confirm the selection.
8
ALL:
Press this button to select all outputs to display with an input
source.
9
TAKE:
Press this button to confirm the selection of an IN and an OUT
button.
10
CANCEL:
Press this button to cancel the IN/OUT selection.
11
PRESET:
¾
When select the MODE in Matrix mode, press “PRESET” to
switch between Normal and Preset mode.
IN 3
IN 5
MUTE
ENTER
-
OUT A
OUT B
MODE
PV DISP.
PRESET
IN 4
SWAP
LOCK
ALL
IN 1
TAKE
IN 2
CANCEL
+
MENU
IN 6
CR-136
1
15
14
13
2
3
4
5
6
7
8
9
10
11
12
