18
6.7 Telnet Control
Before attempting to use the telnet control, please ensure that
both the Matrix (via the ‘CONTROL’ port) and the PC/Laptop are
connected to the active networks.
To access the telnet control in Windows 7, click on the ‘Start’ menu
and type “cmd” in the Search field then press enter
Under Windows XP go to the ‘Start’ menu and click on “Run”, type
“cmd” with then press enter.
Under Mac OS X, go to Go→Applications→Utilities→Terminal See
below for reference.
Once in the command line interface (CLI) type “telnet”, then the "IP
address" of the unit and hit enter. Only when the Telnet port (device
port) is not set to 23, the number "(device port)"" then needs to be
entered after
IP address (device IP) and before hit enter.
