16
Note:
1. When in 'NATIVE' resolution, the unit will read the EDID settings of the
display connected to HDMI OUT A.
2. Naming character up to 9 characters.
3. Chromakey Setup only works when CH 1and CH 2 are selected. CH
1 is the background and CH 2 is the top layer to be overlaid. The
RGB setting is for the CH2 video where the minimum setting figures
cannot be greater than the maximum figures and the maximum
figures cannot be lower than the minimum setting figures.
4. Figures in BOLD are default settings.
6.5 RS-232 Protocol
SPLITTER
►
◄
REMOTE CONTROLLER
Pin
Assignment
Pin
Assignment
1
NC
1
NC
2
TX
2
RX
3
RX
3
TX
4
NC
4
NC
5
GND
5
GND
6
NC
6
NC
7
NC
7
NC
8
NC
8
NC
9
NC
9
NC
Baud Rate: 115200bps
Data bit: 8 bits
Parity: None
Flow Control: None
Stop Bit: 1