27
6.9 WebGUI Control
On a PC/Laptop that is connected to an active network system,
open a web browser and type device’s IP address (default setting
IP:192.168.1.50 ) on the web address entry bar. The browser will display
device’s Image Adjust, Output Resolution, Window Setup, OSD
Settings, Window Convert, Chromakey Setup & Ethernet pages for
users to control.
6.9.1 Image Adjust
Click on 'Image Adjust' to show current I/O information and Channel
input status. Set power status, select source settings and adjust each
channel’s contrast, brightness and saturation, or to set the setting
back to default.
6.9.2 Output Resolution
Click on 'Output Resolution' to select both output ports’ resolution,
default setting is on Native and the device will reference output A’s
EDID.
