CYP AU-A300, Operation Manual

Page: 13 / 24

13
COMMAND DESCRIPTION
MICMODE S/0~3
Mic mode select.
S=Status, 0=Off, 1=Normal, 2=Phantom, 3=Line
mode
FADEFAULT
Factory default setting.
REBOOT
Reboot the unit.
IPCONFIG Print the IP configuration to the screen.
RESETIP
Reset the IP configuration to factory defaults.
SHOWMAC Print the MAC address to the screen.
SHOWTPORT
Print the Telnet communication port to the screen.
SHOWHPORT
Print the HTTP communication port to the screen.
SIPADD Set the IP address.
SNETMASK
Set the Net Mask address.
SGATEWAY Set the Gateway address.
SHTTPPORT
Set the HTTP communication port (1~62235) [80].
STELNETPPORT
Set the Telnet communication port (1~62235) [23].
Note: RS-232 commands will be not executed unless followed by a carriage
return. Commands are case-sensitive.