CYP AU-A300, Operation Manual

Page: 9 / 24

9
6.2 Rear Panel
CONTROL
HDMI OUT HDMI IN 1 HDMI IN 2
RS-232
LINE IN
OUT
OPT. COAX.
IN OPT.
COAX.
R L
OUT R
SPEAKER
RCA
IN
DC 24V
IR IN
OUT
IN
R L R L
+
-
+
-
1 4 8 12 11
3 5 6 7 9 10
2
1 CONTROL:
Connect to an active network with RJ-45 cable for Telnet/
Web GUI control.
2 HDMI OUT:
Connect to HDTV/monitor for both audio and video
display.
3
IR IN:
Connect the IR receiver included in the package for receiving
the IR signal from the device’s remote control.
4
HDMI IN 1/2:
Connect to HDMI source equipment such as a Set-top
Box or Blu-ray player.
5
RS-232: Connect to a PC/Laptop or control system with D-sub 9-pin
cable for RS-232 control.
6
LINE IN: Connect to an audio source with 3.5mm mini-jack cable for
stereo audio signal input.
7 OPT. and COAX. IN:
Connect to source equipment such as a Set-top-
box or games console with an optical or coaxial digital output.
8 OPT. and COAX. OUT:
Digital audio output. Connect to additional
amplifiers or active speakers.
9 RCA IN:
Connect to audio source equipment with an RCA cable for
analogue stereo audio input.
10
RCA OUT:
Connect L/R output to active speakers or an additional
AU-A300 with an RCA cable for analogue stereo audio output.
11
SPEAKER L/R:
Connect to speakers with standard speaker cable.
12
DC 24V:
Connect the 24V DC power supply to the unit and plug the
adaptor into an AC outlet.