CynkoMet T-169/1, Instructions For Use And Operation

Page: 47 / 144

Cynko Met
T-169
Page
47

Reversing the tractor, connect the drawbar end with the upper
transport hitch of the tractor (if in the agricultural tractor, an
automatic coupler is used, ensure that the aggregate operation
has been completed correctly and the drawbar anchorage is
secured).
 Stop the tractor engine.

Install and secure the pivot pin from falling out or check the
automatic hitch.

Connect with the electric, hydraulic and brake installation wiring
with the trailer.
 Release the parking brake of the machine.
NOTE!
NOTE!
At the time of the coupling, unauthorized people
cannot be between the trailer and the tractor.
The operator of the tractor, when connecting the
machine should be particularly careful when
working and make sure that in the course of
coupling, other people are not in the danger
zone.
When connecting the hydraulic hoses to the
tractor, pay attention that the hydraulic system of
the tractor and the trailer are not under pressure.
When coupling ensure adequate visibility.
Connecting the trailer with a hitch other than a
transport hitch is unacceptable because it
threatens the safety of road traffic
After completion of the machine coupling, check
the security of the hitch.
When connecting the braking system (two-wire
pneumatic), the correct sequence of connecting cables is
important Be the first to connect the plug marked yellow to a