CynkoMet T-169/1, Instructions For Use And Operation

Page: 37 / 144

Cynko Met
T-169
Page
37

a parking brake actuated manually by means of a crank
mechanism on the side of the trailer, acting on the rear wheels.
The pneumatic brake is activated from the workplace of
the tractor driver by pressing the brake pedal of the tractor. The
construction of this brake provides automatic inhibition of the four
driving wheels of the trailer with an unexpected disconnection of
the pneumatic trailer and tractor. The used valve has a brake
release system used in the case when the trailer is disconnected
from the tractor (fig. 10).
The braking force 3 regulator located in the suspension
system (fig.9) (fig.10) is controlled manually. Depending on the
load of the trailer with cargo, the control lever must be set in one
of three positions:

position "0" - for an unladen trailer,
 position "1/2" - for the trailer partially loaded,
 Position "1" - for the trailer fully loaded.
1
2
3
4
5
6
7
8