CynkoMet T-169/1, Instructions For Use And Operation

Page: 16 / 144

Cynko Met
T-169
Page
16

Coupling and uncoupling the trailer may only take place when the
machine is immobilized with the parking brake.

During coupling no one can stay between the trailer and the
tractor, the drawbar should be set at the height of the tractor
hitch with the help of the drawbar spring.
3.3 Attaching and detaching the second trailer

Before connecting the machine, make sure that the oil in both
trailers may be mixed.

Only two-axle trailers can be connected to the trailer.

Before attaching a trailer, make sure that both machines are
technically efficient.

Be very careful when you connect the machine.

In the course of coupling no one is allowed to stand between
trailers. The person who helps to aggregate the machine should
stand in such a place (outside the danger zone) to be visible all
the time to the operator of the tractor.

After completion of the coupling of the trailer, check the safety of
the hitch.

Disconnecting the second trailer is prohibited if the load crate is
raised
3.4 Road wheels

When working with the wheels, secure the spreader, in case of
self-launching of movement, using the parking brake and planting
chocks under the wheels.
 Repair work on the tires and wheels should be performed by
using appropriate tools.

After each installation of a wheel, tighten the nuts after the first 10
working hours, then every 50 working hours to check their