13
Send “password" to tracker, it will reply "Resume engine succeed", it means the oil supply is
resumed.
Calibration of fuel sensor
Due to the difference of fuel tank height and resistive fuel level sensor specifications, tracker
need to set an appropriate zero value and full range value to detect the precise fuel percentage.
Zero calibration: Send “ password “ to tracker when the fuel tank is empty , tracker will
adjust zero and reply “ oilzero ok!” . The fuel check is 0%.
Full calibration: Send “password “ to tracker when the fuel tank is full , then tracker will
adjust the full range and reply “ oilfull ok! “ . The fuel check is 100%.
Tracker can connect to car original resistive fuel level sensor ranging from 0-500OHM. You can also
connect add-on resistive fuel level sensor.
Function of Remote Controller (Option, for model G
ONLY )
Button
Function
Descriptions
ARM
Press for 0.5 second, the siren will beep one time.
DISARM
Press for 0.5 second, the siren will beep two times.
ARM &
Silent mode
Press for 0.5 second when it is in disarm state, the siren will
beep one times. No voice from siren when alarm triggered and quit from silent
mode automatically when disarm.
SOS
Press for 3 seconds, Tracker will send SOS alert to authorized phone numbers
without voice.
Deterrence/ca
r search
Press for 0.5 second when it is in arm state, siren will beep 10 seconds, press
disarm button
to quit.
Arm
Set up arm by SMS
Send “arm+password” to tracker, it will make the car enter ARM states and and reply “Tracker is
activated”.
If the car is in ignition (ACC is at “ON” position), then the car can’t enter ARM state, reply “set up
fail! pls turn off ACC”.
If engine turned off, but door is open, then the car can’t enter ARM state and reply “set up fail! pls
close the door”.
Set up arm by remote controller (Option, for model G ONLY)
Press
button on the remote controller for 0.5 seconds, the car enters into armed state and the
siren will beep one time, no SMS reply.
