7
Wiring diagram
Note: The pink wire can be connected to the original car horn; it can also be connected to the siren
bought with the tracker.
Know about the type of the door trigger is positive or negative trigger. Please connect the green wire
to the door control circuit if it is positive, and connect blue wire if it is negative.
Please install the SOS button on the place driver can touch.
SIM CARD Installations
Use the screwdriver accompanied with the device to open sealed buckle and insert the SIM card.
If need data logging function, please insert microSD and put sealed buckle back.
Please make sure the SIM card is for GSM network and able to execute the function of incoming
calls display, no calls can be diverted and the PIN code is locked. The SMS format must be TXT
format, and can’t recognize the PDU format.
Turn on the Tracker Device
Connect the positive & negative wire, red & black ones, with 12V or 24V car power system, wait for
1 minute after connecting power to wait tracker works normal, and then turn on the backup battery
switch.
GSM/GPS LED Indicator
Red LED: when charging, LED ON, after full charged, LED OFF,
In Low power, LED flashes fast.
Green LED: In GSM Mode, LED quick flash for each second, In GPRS Mode, LED flash one time
in three seconds, when No GSM reception, LED ON.
