12
SIM card Balance Inquiry
Send SMS command "pspace+carrier’s phone space+code" to tracker, it
will forward the code to carrier’s phone number and return the balance message received from
carrier’s phone number
How it works: After accept balance command, tracker will remember the “mobile phone number”,
carrier’s phone number and the code;
And then send the code to carrier’s phone number, and forward the message from carrier to m obile
phone number.
Take china mobile for example, mobile users can send “ye” to china mobile number 10086, and
10086 will send user’s balance message to tracker, and then tracker forward the balance message to
mobile phone number , following is an illustration how this function works.
Received and execute
Mobile
balance123456 10086 ye
Tracker
Send ye out to 10086
10086(China mobile)
Forward balance message to mobile phone
ACC working alarm
Send balance back
Received Balance message
Received ye from number in
the tracker and process
This function is deactivated by default. To active this functions, send "ACC+password" to tracker, it
will reply "ACC ok". And tracker will send "ACC on+latitude & longitude" to authorized numbers
when detect ignition on, that means the vehicle has been started; and tracker will send “ACC
off+latitude & longitude" to authorized numbers when ignition off and ACC is off, that means
vehicles has been stopped.
Send "noACC+password" to deactivate this function, tracker will reply "noACC ok"
This configuration can only activate and deactivate the alarm to authorized numbers; it will send to
web platform automatically in GPRS mode and can't be deactivated
Cut off the oil and power system
Send command “stop+password” to tracker, tracker will execute it and reply “Stop engine Succeed”.
And it will remain immobile state until next command to resume.
Stop mode
Execute immediately: Send command “qupassword” to tracker, it will reply “quickstop
OK”. Then tracker will stop the car immediately after “stop” command.
Execute depends on speed(Default mode): Send command “noqupassword” to tracker, It
will reply “noquickstop OK”, Then the tracker won’t stop the car immediately after “stop” command,
instead, it will reply “it will be executed after speed less than 20KM/H”, and stop the car when the
speed is less than 20KM/H.
Resume the Oil and Power System