~9~
The volume of the uniphone ring in the range of 1-5. After entering the subprogram there will appear
. Using the '1' and '3' keys, set the desired volume and confirm with an asterisk. This function sets the same volume
for all physical addresses.
3.2.3.
A kind of a uniphone melody in the range of 1-3. After entering the subprogram there will appear
.
Using the '1' and '3' keys, set the desired melody and confirm with an asterisk. This function sets the same melody for
all physical addresses.
3.2.4.
The system call time with the tenant after which the control panel automatically disconnects. After entering the
subprogram, the currently set time is displayed, e.g:
. Using the '1' and '3' keys, set the desired time in
the range of 0:30 - 5:00 with step 30s and confirm with an asterisk.
3.2.5.
System activity time of the control panel after the end of the call. Enables you to start a call after the call is ended
within the programmed time. After entering the subprogram, the currently set time is displayed, e.g:
.
Using the '1' and '3' keys, set the desired time in the range of 1s - 20s with step 1s and confirm with an asterisk.
3.2.6.
Notifying the tenant about entering by code or key fob After entering the subprogram there will appear
.
Using the '1' and '3' keys, set 'YES' or 'NO' and confirm with an asterisk. This function is set for all physical addresses.
3.2.7.
Deleting the contents of the control panel, i.e: Subscriber entry codes, shared code, subscriber keys, common keys,
common keys
3.2.8.
Returns the control panel to the factory settings, i.e .: All subscriber settings together with the subscriber table.
Manufacturer's opening code table.
3.2.9.
Displays the electronics version of the control panel