~5~
Adjustable separate opening time from the exit button
Reverse operation mode of the strike
Volume control of the electric strike
Gate control
Possibility of personal assignment of the entrance to the combination lock/RFID key
Individual settings for each subscriber
Three ringtone melodies
Increasing ringtone function
Camera illuminated with IR LEDs
camera viewing angle adjustment
Wide-angle camera: 110 degrees
Symmetrical video line
The installation mode facilitates the installation of the system by one person
Search mode for damaged uniphones
All settings can be programmed from a PC
An RFID service key that simplifies system installation
Office opening mode
Quick entry mode to the staircase
2. P
ROGRAMMING OF
CC40005 system
To prepare the system for work, each panel should be paired with the control electronics.
To do this, enter the PC-4000 panel programming mode.
To access the programming mode, enter on the keypad the following sequence:
. On
the display there will appear a field for entering the
serial number of the panel (PC-4000 board)
Enter the serial number and confirm with the key
. Then, the field for entering the installer's password will appear
. Enter the default value
and confirm with the key
.
If the password and serial number are compatible, on the display there will appear
and from that
moment the panel will be in programming mode. If an incorrect serial number or password has been entered, the
panel will display the following message:
.
3. D
ESCRIPTION OF PROGRAMS
There are five main programs from P01 to P05. Each program supports a separate group of settings. In order to
move between the programs, use the keys "1" and "3". One scrolls programs to the left and three to the right. In order
to exit completely from programming mode, press . Below there is a detailed description of all programs together with
their subprograms. If the panel is configured as Master, only the settings in P01 program can be changed.