CYCLOPS tornado osd series, User Manual

Page: 18 / 18

4
、
First step update the AHRS firmware, clicking on TORNADO AHRS update.exe
The update progress is as above, DO NOT disconnect the update kit or cut off the
power supply of TORNADO OSD.
Click on OK to finish the update then cut off the power of TORNADO OSD and
remove the update kit.
5
、
Second step update the Flight control firmware.
6
、
The OSD will enter auto detection mode during the first power on, connect GPS
module and the main board should be placed strictly horizontally and statically,
avoid any movement or vibration. If there is any error during the detection, there
will be error shows on the OSD screen, cycle the power and do it again.
7
、
When the detection is done, the OSD screen will enter the working mode, please
set all your configurations one time again, specially, don't forget to reset the
GYRO and confirm the SEV CENTER items.