CYBEX Eagle NX Pulldown, Owner'S Manual

Page: 13 / 26

Separate Frame
1. Remove six bolts and three connectors securing two halves of the frame using a 7/32” Allen wrench.
Qty Description
6 Bolt 1
3 Connector 2
2. Move each half through the doorway to the desired location.
Assemble Frame
1. Apply #242 Loctite to bolts.
Qty Description
6 Bolt 1
3 Connector 2
1 # 242 Loctite 3
2. Secure two halves of the frame with the six bolts and three connectors, using a 7/32” Allen wrench.
Install weight plates
1. Lean guide rods slightly outward, away from machine, DO NOT put excessive pressure on guide rods, it will
damage lower guide rod caps.
2. Wipe the entire length of the guide rods with a clean cloth.
3. Lubricate the guide rods with a light coating of medium weight oil.
Page 13 of 25