CYBEX Eagle NX Pulldown, Owner'S Manual

Page: 16 / 26

Install cable
1. Route cable through slot in top cover, through pulley bracket, and down through guide rod plate.
2. Install two BHSCS and two pulley shaft bolts securing lower pulley assembly to pulley bracket using two 5/16”
Allen wrenches.
Qty Description
1 Pulley shaft bolt 1
1 BHSCS 2
1 Lower pulley assembly 3
1 Pulley bracket 4
3. Install two BHSCS and two pulley shaft bolts securing top two pulley assemblies to pulley bracket using two
5/16” Allen wrenches.
Qty Description
2 Pulley shaft bolt 1
2 BHSCS 2
2 Top pulley assembly 3
1 Pulley bracket 4
4. Squeeze sides of top weight cover together and lift up. Pull down on cable until it is tight. Install spiral pin
connecting cable assembly to top weight.
Qty Description
1 Top weight cover 1
1 Spiral pin 2
5. Verify the cable is moving smoothly.
6. Install back panel.
Page 16 of 25