CYBEX CardioTouch 770T Owner'S Manual Download Page 24

Page: 24 / 106

Thread six bolts into the remaining holes of the right upright and left upright.

Qty.

Description

Console

Upright (Right shown)

Bolt

Tighten all of the bolts using a 7/32" Allen wrench and 9/16" open end wrench.

Connect Display Cable

The display cable and CSAFE cable have the same connectors. The display cable is black, the CSAFE
cable is red.

Route the cables under all other cables and towards the base plate.

Plug the display cable, located at the bottom of the upright assembly into the communication port
of the controller.

Qty.

Description

Controller

Communication port

Display cable, Black

CSAFE cable, Red (optional)

Coax cable (optional)

Power supply cable

Page 24 of 105

Cybex Treadmill Product Number 770T Part Number LT-22983-4 M

Summary of Contents for CardioTouch 770T











































































































Search results

Summary of Contents for CardioTouch 770T

Reviews:

Related manuals for CardioTouch 770T

Brands by name

Popular brands

CYBEX CardioTouch 770T, Owner'S Manual

Search results

Summary of Contents for CardioTouch 770T

Reviews:

Related manuals for CardioTouch 770T

Brands by name

Popular brands