Cybex Arc Trainer 625A/625AT Owner’s Manual
35
Install the left handle assembly
1.
Position the left handle assembly in the correct position on the left side where the right handle
assembly was removed in the previous procedure.
2.
Apply Loctite to threads inside the pivot pin and screw removed in the previous procedure.
3.
Place left handle assembly in position and slide pivot pin assembly back in place.
4.
Install the screw and washer to the left handle assembly using two 7/32” Allen wrenches.
5.
Pivot left handle assembly up and slide left linkage rod onto left arm.
Left Linkage
Rod
Linkage Rod
Cap
Screw
Washer
Left Arm
Flange
Spacer
Loctite
6.
Place a drop of Loctite onto the screw.
7.
Install the screw, washer, linkage rod cap, and flange spacer using a 3/16” Allen wrench.
8.
Tighten screw to a minimum of 90 in/lbs.
Install right handle assembly
1.
Position the right handle assembly in the correct position on the right side where the left
handle assembly was removed in the previous procedure.
2.
Apply Loctite to threads inside the pivot pin and screw removed in the previous procedure.
3.
Place right handle assembly in position and slide pivot pin assembly back in place.
4.
Install the screw and washer to the right handle assembly using two 7/32” Allen wrenches.