Cybex 770T-CT Treadmill Owner’s Manual
31
Place the motor cover into position vertically by aligning the two tabs and four plastic
3.
connectors. Two plastic connectors are mounted in the front cover and two in the motor cover.
Plastic
Connectors (4)
Motor
Cover
Tabs (2)
If motor cover top does not fit properly, loosen the side screws on the front cover as needed.
Tighten the four front cover screws using a Phillips screwdriver. Be sure the screws are
4.
securing the motor cover’s tabs.
Install power cord.
Install the power cord with the mounting bracket and mounting screw using a Phillips screwdriver.
Power Cord
Bracket
Screw
Level the treadmill.
Confirm that the treadmill is on a level surface.
Summary of Contents for 770T-CT
Page 2: ......