CYBEX 400T, Owner'S Operating Manual

Page: 42 / 55

36
5 / M
AINTENANCE
Odometer Reading in
Miles (Km)
Check Running Belt & Tension/Track as needed Vacuum debris inside hood cover and clean treadmill Replace the Running Belt Check the current draw Measure Motor Brush Length
100 (162)
X
250 (402) X
750 (1207)
X
1000 (1609) X X
1250 (2012)
1500 (2414)
X X
1750 (2816)
2000 (3219)
X X
2250 (3621)
2500 (4023)
X X
2750 (4426)
3000 (4828)
X X
3250 (5230)
3500 (5633)
X X
3750 (6035)
4000 (6437)
X X
4250 (6840)
4500 (7242)
X X
4750 (7644)
5000 (8047)
X X
X
X X
5250 (8449)
5500 (8851)
X X
5750 (9254)
6000 (9656)
X
X
X
X
X
X X
X
X
X
6250 (10058)
6500 (10461)
X X
6750 (10863)
7000 (11265)
X X X X X X
115V Unit Max Current Draw, Displayed at 3.0 MPH, walking on it => 18 Amps at 0% Grade
220V Unit Max Current Draw, Displayed at 3.0 MPH, walking on it => 10 Amps at 0% Grade
Minimum brush length, as measured from top of 'box' shape to the bottom: 0.438 (7/16") (1.1 cm)
Running belt should not noticeably slip when loaded at 3.0 MPH.
If so, tighten each rear bolt 1/4 turn clockwise and retest.
Replace deck at 14000 miles (22,530 Km)
500 (805)
X X
Check deck wear Lubricate Elevation
X
X
Service Schedule