manualshive.com logo in svg

CYBEX 16120-999-4, Owner'S And Service Manual

Share
Download
CYBEX 16120-999-4 Owner'S And Service Manual Download Page 16

Page 10

Cybex Plate Loaded 16120 Smith Press Owner’s Manual

Locate four Socket Head Cap Screws (SHCS), four washers and loctite from shipping package.

D. 

Place a small drop of loctite on the four SHCS and in threaded holes of weight bar bracket. See Figure 5.

E. 

Place washer over SHCS.

F. 

Using a 5/16” Allen wrench tighten the four SHCS securing the weight bar bracket to the bearing housing.

G. 

Repeat steps 5C - 5F for opposite side.

H. 

6. Cable installation

 

Locate two Hex Head Cap Screw HHCS from shipping package.

A. 

Place a small drop of loctite on HHCS and in threaded hole.

B. 

Using a 7/16” wrench, attach cable end to weight bar bracket with HHCS. 

C. 

NOTE: Cable end must be attached 

straight to avoid a kink in cable. 

See Figure 6.

HHCS

Cable End

Cable

Weight Bar Bracket

Figure 6

Repeat steps 6B and 6C for opposite cable end.

D. 

8. Verify proper operation.

7.  Securely anchor machine to the fl oor. 

Securely anchor machine to the fl oor using the anchor holes provided in each machine. 

A. 

NOTE:   Cybex is not responsible for the actual anchoring of equipment. Consult with a professional contractor.

NOTE:  Use fasteners having a minimum of 500 lbs. tensile capacity (3/8’’ grade 2 bolts or better).

NOTE:   If legs/frame does not contact surface, DO NOT pull down with anchors. Shim any leg or 

frame not in contact with surface using fl at washers.

NOTE: Cable end must be attached  
            straight to avoid kink in cable.

Summary of Contents for 16120-999-4



























Reviews:

No comments

Brands by name

Popular brands

Load more brands