User's Guide
mentioned in the manual of your monitor. The settings for the horizontal and vertical
synchronisation unfortunatly are not allways printed in the manual of the monitor, therefore you
should only alter them if you REALLY know what you are doing. If you are not 100% sure of
how to edit these parameters properly, please consult your hardwaredealer whom you have
purchased the monitor from.
All mentioned settings here should be understood as absolute values with the actual settings.
Resolutions
When you have changed the monitor parameters, the resolutions available must be changed
accordingly. Chose a resolution from the list and select "Change" to set the values valid for this
resolution.
All values for the horizontal settings relate to multiples of pixels. The values for vertical
frequencies relate to display lines. CGXMode prevents you setting values that are outside the
threshold values set in the monitor parameters. When setting the horizontal value, please note
that when you change the horizontal frequency on many multi-scan monitors, this causes
resynchronisation of the monitor.
Advice!
Once you have generated a monitorfile, you may exchange them with other
flawlessly. If you have generated a monitorfile for your monitor other users
may like to take advantage of it if you make it accessable to the public.
Versavice you may use other monitorfiles by moving them into your
"sys:prefs/monitors" drawer.
page 33