User's Guide
Amiga 3000 you pull it forward. For further information, please consult your Amiga User Manual. Discharge
any static charge from your body by simultaneously touching the Amiga casing and the still antistatic packed
CyberVision PPC.
Picture 1.
Connectors of the
CyberVision PPC
graphics card
5.
Identify the 120pin connector on your CYBERSTORM MKIII/PPC. This connector is located on the
upper right position as shown on picture 3.
6.
Remove the CyberVision PPC from the antistatic
packaging and connect the 10pin cable, which is included
in your package, with the CyberVision PPC (as shown on
picture 1 and 2). Now place the CyberVision PPC onto the
120pin connector of your CYBERSTORM MKIII/PPC.
Picture 1 describes the different possibilities on how to
connect the card with your computer. In an Amiga 4000
Desktop the card is plugged into the CYBERSTORM
MKIII/PPC as shown on picture 3.
Picture 2.
Connectors of the
Connector-Module
7.
Because the CyberVision PPC is located near the backplane (Zorro Slot board) place the isolation
cardboard between the CyberVision PPC and the backplane (Zorro Slot board) of the Amiga 4000.
When the cardboard is folded along the marking it can be placed on the mounting rail over the
backplane and, if necessary, fixed with adhesive tape. This isolation prevents the CyberVision from
coming into contact with the backplane if, for example, the computer is inadvertently knocked whilst
it switched on. Due to mechanic problems in the Amiga 4000 Tower and Amiga 3000, the
page 25