Copyright © 2012 CyberPower Systems, Inc.
LCD SETUP FUNCTIONS
11
LCD INFORMATION READOUT
There are 12 types of UPS information available for display on digit area.
Information Submenu
Description
OUTPUT XXX V
Displays the Output Voltage
OUTPUT XX.XHz
Displays the Output Frequency
OUTPUT XXX (k)VA
Displays the Output VA
OUTPUT XXX% VA
Displays the Output Load Percentage of Maximum Apparent Power
OUTPUT XXX (k)W
Displays the Output Wattage
OUTPUT XXX% W
Displays the Output Load Percentage of Maximum Active Power
INPUT
XXX V
Displays the Input Voltage
EVENT
XXX
Displays the Event ID
ESTIMATED RUN TIME
%
Displays the Estimated Percentage of Battery Capacity
ESTIMATED RUN TIME
XX(.)X [Min][Hr]
Displays the Estimated Run Time with battery
TIME TO SHUT DOWN
XX(.)X [Min][Hr]
Displays the Time Delay to Shutdown UPS
TIME TO TURN ON
XX(.)X [Min][Hr]
Displays the Time Delay to Restart UPS
LCD SETTINGS CONFIGURATION
There are 8 UPS settings that can be configured by the user.
1.
Press the “
ESC
” button simultaneously for 5 seconds to activate the setting mode.
The first configuration parameter will be displayed on the LCD screen.
Note: The manual settings programming mode can ONLY be invoked while UPS is in Bypass mode or Standby mode. To
make UPS on Standby mode or Bypass mode, connect utility power to UPS and do not turn on UPS.
2.
Press the “
ENTER
” button to select the setting you want to configure.
3.
Press the “
▼
” buttons to scroll through the different parameters.
Press the “
ENTER
” button to select the parameter you want.
4.
Press the “
ESC
” button simultaneously for 5 seconds to cancel and exit setting mode. Press the “
ENTER
” button
simultaneously for 5 seconds to save all the settings you just do and exit setting mode.
