background image

© 2010 CyberPower Systems (USA), Inc. All Trademarks are property of their owners.

Page:  16 of 17

Table 7:  Specifications

6   SPECIFICATIONS

Model Number 

CS150U48V3

Input:

 

 Rating Voltage/Frequency 

100 - 240V / 50 - 60Hz

 Input Voltage Range 

90 - 264Vac

 Frequency Range 

47 - 63Hz

 P.F. 

> 0.9 at Rating Voltage and Max Load

Output: 
 

Output Power Continuous 

150W

 Output Power Max 

170W, 10sec Max.

 Output Voltage Range 

42V - 58Vdc

 Output Current (max Load) 

3.1A Nominal

 Ripple 

< 30mVrms

 Noise 

< 120mVp-p

 Efficiency  

> 85% at Rating Voltage and Max Load

 

Output Connection

 

7-Pin communication signals connector 

 

(DECA ME030-5007), Max 12AWG

Battery 

 

 Battery Type 

Sealed, Maintenance Free Lead-Acid Battery

 Numbers of Battery 

7.2 (7) AH/12V (8-standard, 4-factory orderable option)

 Replaceable 

Yes

Surge Protection and Filtering

 

 Lightning / Surge Protection 

GR-1089-CORE Sect 4

Warning Diagnostics

 

                                                            

AC (AC/Battery Mode Indicator), Output (Output On/Off                     

                                                         Indicator), Battery (Battery Missing/Replacement Indicator)

Management

 

 Auto-Charge 

Yes

 Communication Interface 

On Battery, Replace Battery, Battery Missing, Low Battery

Physical

 

 Maximum Dimensions (W*D*H) 

389mm x 230mm x 400mm

 Weight 

28kg (with 8pcs battery)

Environmental Specifications

 

 Operating Temperature 

-4°F to 131°F (-20°C to 55°C)

 Operating Humidity 

0 to 95% non-condensing within enclosure

 Max Operating Elevation 

10,000ft (3,000m)

 Max Storage Elevation 

50,000ft (15,000m)

  

-4°F to 131°F (-20°C to 55°C)

 

Compliance

 

CSA/UL 60950, EN 60950, EN 55022 Class B, FCC Part 

 

15 Class B, GR-63 Sect 4.2 Fire Resistance,

 

GR-1089 Sect 3 Emissions, Sect 4 Lightning and AC 

 

Power Fault, Sect 7 Electrical Safety.

Storage Temperature

Indicators

Summary of Contents for CS150U48V3



















Reviews: