CyberPower CPS325SL Manual Download Page 13

CPS325SL 

Guaranteed Uninterruptible Power System 

 

13 

the Initial Customer.  This provision 
shall NOT create any Implied War-
ranty or Merchantability or of Fitness 
for a Particular Purpose that would 
not Otherwise apply to the Product.  
NOTE:  Some States do not allow 
limitations on how long an implied 
warranty lasts, so the above limitation 
may not apply to you. 

LIMITATION: THE LIMITED WAR-
RANTY AND THE POWER CON-
TROL GUARANTEE DO NOT 
COVER  

The Limited Warranty and the Power 
Control Guarantee are intended to 
exclusive rights and remedies and 
replace any other rights, to the extent 
allowed by law. 
As to CyberPower products, the 
Limited Warranty does not cover or 
apply to:  Misuse; modification; 
operation or storage outside environ-
mental limits for the Products; in 
transit, in shipment, or in storage, 
damage or deterioration; improper 
operation or maintenance; use with 
items or equipment not designed or 
intended for use with the Product.  
 As to Connected Equipment, the 
Power Control Guarantee covers only 
damage within the specific terms of 
the Power Control Guarantee to 
Connected Equipment (and only up to 
the applicable aggregate ceiling 
amount).  The Power Control Guaran-
tee does not cover damage to Con-
nected Equipment or apply if the 
product has been operated in a failure 
mode or not in compliance with 
CyberPower operating instructions 
and manuals. Or if the Connected 
Equipment has been operated in a 
failure mode or not in compliance with 
the instruction and manuals of its 
manufacturer/vendor.   
The Limited Warranty and the Power 
Control Guarantee Do Not Apply 
Unless The Initial Customer:  
Has properly connected the Product 
and the Connected Equipment to 
properly wired and grounded out-
lets/power supplies (including compli-
ance with electrical and safety codes 
of most current National Electrical 
Code, ANSI/NFPA 70), without the 

use of any adaptors, extension cords, 
or other connectors. 
Has provided a suitable and proper 
environment for use and installation 
of the Product and Connected 
Equipment. 
Has properly installed and operated 
the CyberPower Product and Con-
nected Equipment. 
CyberPower Does Not Cover or 
Undertake Any Liability in Any Event 
for Any of the Following: 
Loss of or damage to data, records, 
or software; restoration of data or 
records; or reinstallation of software. 
Damage from causes other than AC 
Power Line Transients, spikes, or 
surges on properly installed, ground-
ed and code-compliant 120 volt 
power lines in the United States and 
Canada; transients, surges, or spikes 
on standard telephone land lines, 
PBX telephone equipment lines or 
Base 10/100T Ethernet lines, when 
properly installed and connected. 

 

(This exclusion applies, for example, 
to fluctuations in data transmission or 
reception, by CATV or RF transmis-
sion or fluctuations, or by transients in 
such transmission).  
Damage from any circumstance 
described as excluded above with 
respect to the Product. 
Damages from fire, flood, wind, rain, 
rising water, or leakage or breakage 
of plumbing; from abuse, misuse, or 
alteration of either the Product or the 
Connected Equipment. 
Exclusion of Consequential and Other 
Damages.  The sole and exclusive 
remedies of the Initial Customer are 
those provided by the Limited War-
ranty and Power Control Guarantee.  
CyberPower excludes any liability for 
personal injury under the Limited 
Warranty and Power Control Guaran-
tee.  CyberPower excludes any 
liability for direct, indirect, special, 
incidental or consequential damages, 
whether for damage to or loss of 
property, loss of profits, business 
interruption, loss of information or 
data, EXCEPT FOR (AND ONLY 
FOR) the specific limited agreement 
of CYBERPOWER to provide certain 

warranty benefits regarding “Con-
nected Equipment” under the “CY-
BERPOWER Power Control Guaran-
tee”.   
NOTE:  Some States or Provinces do 
not allow the exclusion or limitation of 
incidental or consequential damages, 
so the above limitation may not apply 
to you. 

DO NOT USE FOR MEDICAL OR 
LIFE SUPPPORT EQUIPMENT OR 
OTHER HIGH RISK ACTIVITIES. 

CyberPower does not sell the Prod-
ucts for use in high-risk activities.  
The Product is not designed or 
intended for use in hazardous envi-
ronments requiring fail-safe perform-
ance, including the operation of 
nuclear facilities, aircraft navigation or 
communication systems, air traffic 
control, weapons systems, life sup-
port or medical applications or for use 
in any circumstance in which the 
failure of the Product could lead 
directly to death, personal injury, or 
severe physical or property damage, 
or that would affect operation or 
safety of any medical or life support 
device (collectively, “High Risk Activi-
ties”).  CyberPower expressly dis-
claims any express or implied war-
ranty of fitness for High Risk Activi-
ties.  CyberPower does not authorize 
use of any of its products use in any 
High Risk Activities.  

ANY SUCH 

USE IS IMPROPER AND IS A MIS-
USE OF CYBERPOWER PROD-
UCTS

.  

The Limited Warranty and the Power 
Control Guarantee are governed by 
the laws of the United States and the 
State of Minnesota, without reference 
to conflict of law principles.  The 
application of the United Nations 
Convention of Contracts for the 
International Sale of Goods is ex-
pressly excluded. 
Contact Information:  CyberPower’s 
address is 5555 12th Ave East, Suite 
110, Shakopee, MN  55379 and its 
phone number is (952) 403-9500.  
CyberPower is the warrantor under 
this Limited Warranty.  You may also 
contact CyberPower on the Internet at 
www.cyberpowersystems.com. 

 

Summary of Contents for CPS325SL














Reviews: