CyberPower 10K On-Line series, User Manual, Page: 23 / 43

UPS condition Buzzer status
Fault active Continuous
Warning active Beep every second
Battery output
Beep every 4 seconds, if battery low, buzzer Beep
every second
Bypass output Beep every 2 minutes
Overload Beep twice every second
Note
〇
: Lightened constantly
※
: #1-#4 Lightened circularly
★
: Flashing
□
: Depended on the fault/warning status or other status
Table 5-3 Alarm definition
The UPS provides useful information about UPS itself, load status,
battery, events, identification, and settings through the front panel
display.
During powering on, the LCD would display the CyberPower logo for
several seconds and then enter to the default page which shows the
UPS status summary.
On the UPS status screen it provides the following information:

Status summary, including mode, load, battery and utility

Alarm status, if any is present.

Fault status, if any is present.

Output parameter, including output voltage, current and frequency.

Input parameter, including input voltage and frequency.

Bypass parameter, including bypass voltage and frequency.

Power parameter, including output VA and watt.

Battery parameter, including battery capacity, voltage and remain time.
20