Gateway Mode
For all the required Ports
Use the tables given below to gather the information you need before proceeding to deploy the Appliance.
4
GETTING CONFIGURATION INFORMATION
The LAN IP address and Subnet Mask must
be valid for the respective networks.
Port A
Port B
Port C
Port D
IP address
___.___.___.___
___.___.___.___
Zone Type
LAN/WAN/DMZ
IP address
___.___.___.___
Subnet Mask
___.___.___.___
Type
IP address
___.___.___.___
___.___.___.___
Type
Subnet Mask
Zone
LAN/WAN/DMZ
Subnet Mask
Zone
LAN/WAN/DMZ
IP address
___.___.___.___
Subnet Mask
___.___.___.___
Zone Type
LAN/WAN/DMZ
Bridge Mode
Bridge
IP address
Subnet Mask
___.___.___.___
IP address
___.___.___.___
You are probably
using
DHCP
PPPoE
Static
Get information
-----------
Username
Password
IP address
Subnet mask
Gateway IP address
Primary DNS
Secondary DNS
How to get the information:
From the PC connected to the Internet:
open a command prompt window, type the
command ipconfig.
If Internet
connection
is via
Cable modem,
DSL with a
Router
Home
DSL/ADSL
T1/E1,
Static
broadband,
Cable or DSL
with a static IP
Use the table given below to gather ISP (Internet Service Provider) information
Cyberoam
configuration from
Network Configuration
wizard
Select “Obtain an IP from
DHCP”
Select “Obtain an IP from
PPPoE”
Select “Use Static IP”
